In an effort to improve treatment efficacy and safety, the classic HIFU (High-Intensity Focused Ultrasound) device has entered into the therapeutic world for facial rejuvenation, lifting, tightening, and body contouring. There has been increasing public concern about facial wrinkles and loss of elasticity due to aging. In response to this problem, various treatments have been proposed for the treatment of facial wrinkles and laxity; however, the ideal treatment option has yet to be identified. Recently, ultrasound was introduced as a new treatment for therapeutic and cosmetic purpose. High-intensity focused ultrasound (HIFU) may be the best example of this technique.
The Classic HIFU device is equipped with promising technology that allows having more accurate sculpting of face and body. This machine is operated in a combination of guiding image with the number of shots to be delivered. The user-friendly manner of this device is very much useful for beginners as well. The cost of the treatment process is comparatively low as the price of the cartridge is relatively low. The advanced cosmetic technology of the device can significantly tighten and lift several areas of the face and body, reduce the signs of aging and improve the tone of the skin in a single session, with potentially long-lasting effects. There are no incisions or major injuries to the surface of the skin.
HIFU is a non-invasive procedure that uses focused ultrasound energy. It targets deep dermis and SMAS; generates thermal coagulative zones in the targeted tissues without damaging the epidermis and subcutaneous tissues. This focused energy causes a contraction of the SMAS layer, as well as denaturation and remodeling of the targeted collagen fibres resulting in NEOCOLLAGENESIS, which then produces significant skin tightening and lifting tissues.
HIFU uses a high level of ultrasonic energy which is tightly focused into a small point to rapidly coagulate targeted tissues. The use of high intensity focused ultrasound has recently expanded from high-precision surgical procedures into the field of noninvasive cosmetic medicine. HIFU differs from other technologies used for skin rejuvenation. A concave disk within the transducer focuses ultrasound energy with very high intensity at specific locations below the epidermis and can specifically target the dermis or Superficial Muscular Aponeurotic System (SMAS) layer, a fibrous network consisting of collagen fibers, elastic fibers, and fat cells that connects the facial muscles with the dermis and is tightened during a facelift. Where applied, the energy at the focal point rapidly rises while tissue above and below the focal zone are unaffected. Application of HIFU causes collagen fibers to denature and contract and stimulates the production of new collagen that results in skin tightening and rejuvenation.
There are mainly three layers of our skin:
The SMAS-layer (Superficial Muscular Aponeurotic Layer) is located directly below the Subcutaneous Fat layer (Shown in the picture) of the skin. It consists of Collagen Fibers. The SMAS layer protects us from aging and sagging skin. When the level of SMAS weakens, human skin becomes saggy and looks elderly.
The Latest Areton ltd. Multiline HIFU Device Allows the Aesthetic Practitioner to work more effectively and with greater speed than traditional single line HIFUs. Comparing with single line HIFU devices, multiline HIFU device can deliver 11 lines of energy per shot and thereby it covers relatively a large area with one shot. This new design allows the practitioners to cut on the treatment time dramatically as one shot can deliver several lines. It means that 11 lines per shot will shorten the time of treatment and minimization of time in treatment means minimization of costs. In reference to the business, the HIFU users can produce a considerable saving by minimizing the treatment costs comparing with other clinics where single line devices are used.
The device multiplies its effectiveness with the extensive set of cartridges. The cartridges are capable of controlling the ultrasound emitter with pinpoint accuracy on the area to be treated. In this way, the emission surface is divided into a very high-definition matrix of points; capable of managing the focal points of the ultrasound on a maximum of 11 lines and 26 points per line.
Four standard cartridges will come with multiline HIFU device to have customizable treatment in different zones of face, neck and body.
This device is for aesthetic purposes only. The treatment can be performed on face, neck, belly, back, thigh and arms. It can help to—
Despite the information provided in this manual the user has to always exercise caution in the use of these types of Devices. This is due to the ablative power of professional High-Intensity Focused Ultrasound devices. Failure to exercise caution can result in injuries. This device intended uses are merely aesthetic, no claims of fat loss are made with this device. Do not use this device on the upper eyelids and around the mouth, this could cause permanent injuries to the eyes and nerves.
Thanks for using Areton Classic HIFU Device, in order to fully make use of the product please follow the instructions below:
The device will come with the accessories that are shown in the following picture. These will be required to operate the machine and perform the treatment. A set of five cartridges will be combined with the machine and among them, three (1.5mm, 3.0mm, and 4.5mm) are for face and neck treatment and two (8.0mm and 13.0mm) are for treating the body. Each of the cartridges can deliver lines of shot and the performance of cartridge gradually deteriorates with its usage. It means that the performance of the new cartridge differs with the used one. Among all other accessories, the USB device will also come with the device and you must use it before starting treatment procedure.
Press this button on-screen, a small window, like the picture in the right-hand side, will open where you can increase and decrease the distance between one dot to another. The lower distance among dots covers wider areas per cm² of skin than maximizing the distance among the dots.
The highest length is 14mm shown in the picture above. If you reduce the length to 7mm for example, the length that the transducer will cover is half of the total length. when you want to treat comparatively on sensitive areas, you can reduce the length to ensure that the energy will be penetrated to a certain area.
The energy on the screen is just an approximation. It does not control the intensity of energy. The advanced setting can control the intensity of energy. Increasing or decreasing power in the advanced setting will not affect the value of power on the system interface. If the power is fixed at 2.0j on system interface and reduced advanced power by 10%, the power 2.0j will remain the same. If the power is increased by 50% in the advanced setting, the power 2.0j will remain as before. Increasing or decreasing the power in advanced setting actually induce the intensity of power on the system interface. In the picture below, it is more clearly explained about advanced power setting.
in the right hand, the above picture indicates how many lines of shot the cartridge can deliver. It is showing that the cartridge can deliver shots.
Patient number is the total number of shots that have been delivered.
click on image to open full image
Power measures the intensity of energy passes into a different layer of skin. The classic HIFU device provides an option of increasing and decreasing the baseline power in advanced power setting. Press this button on screen for around 3 secs; the advanced power setting screen will be displayed like the picture above. Here, 6 different depths of cartridges will be shown. The power will be shown at 0% means the power is neutral and 0% is the baseline of power which can be increased up to 50%.
Increasing or decreasing energy level in the advanced setting will not affect the value of energy on the system interface. The value of energy on screen is just an approximation. For example, If you fixed the energy at 2.0j on system interface and reduce advanced power by 10%, the power 2.0j will remain the same. If the power is increased by 50% in the advanced setting, the power 2.0j will remain as before. Increasing or decreasing the power in advanced setting actually induce the intensity of power on the system interface.
Step 1:
Step 2:
Step 3:
Meizi are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Step 4:
Step 5:
Step 6:
Step 7:
In order for the cartridges to fully work, they have to be filled with water. If you do not use the cartridges for seven months to a year, water inside the cartridges is evaporated. So it needs to fill the cartridges again with distilled water. When you will pour water, be careful from the overspill of water. Otherwise, If the PCB gets wet, the cartridge could be damaged. The process of emptying the cartridge and pouring water is shown below.
Usually, the cartridges come with water-filled inside. But it depends on how it has been shipped to you. If it has shipped by air then the cartridges will be empty.
Note : Water has to be changed every 3 months. Do not need to change the water after the number of shots.
The overall number of lines are applied to a treatment area depends on the size of the area and chosen protocol. Treatment guidelines including the selection of cartridges and suggested treatment patterns over different areas of the face and body are provided by Areton Ltd.
Cartridge 1.5: safe energy scope: 0.1-0.9J
Cartridge 3.0: safe energy scope: 0.1-1.0J
Cartridge 4.5: safe energy scope: 0.1-1.2J
Customer’s age and skin condition could be the parameter to select the level of energy. But, It is strongly advised to start treatment on the lowest power setting. Higher intensity of energy could be painful for patients and therefor, always ensure that the patients are feeling comfortable with any changes of energy level. The lowest distance between line and dots along with lower power setting in advanced setting can help you perform more tolerable and safe treatment process.
The most worrisome potential complication is motor nerve palsies. The areas at the greatest risk for injury are the temporal branch of the Trigeminal Nerve and the Marginal Mandibular Nerve, where the depth of the nerve becomes relatively superficial. These effects can be prevented by avoiding treatment directly over the mandible or facial nerves. Because there are no commercially available eye shields known to protect the eye from ultrasound energy, treatment should not be done inside the orbital rim. The thyroid gland should be avoided and the areas can be marked from being inadvertent.
Drain all cartridges before embarking on aircraft. It is highly advisable that the fluid inside cartridges are drained before transporting the device by aircraft. Refill the cartridges with distilled water once you have arrived at the destination and intended to use the device again. Failure to drainage before embarking can cause breakage of the cartridge due to pressure caused by the altitude of the aircraft. In any case when transporting the cartridge, always place it inside the original shock-absorbing casing provided.
HIFU (High Intensity Focused Ultrasound) owns the non-invasive and focused penetrating advantage. HIFU System is a new category in aesthetics—non-invasive tissue lifting. Treatment directs focused sound waves through your skin to gently heat the deeper tissue, which then lifts and supports loose skin without cutting or injury to the surface of your skin. Besides the visible effects of lifting and tightening, there may also an invisible result from HIFU lifting, with the creation of new collagen, which helps the skin maintain its youthfulness.
With its unique high energy focused ultrasound, HIFU will reach SMAS layer accurately and improve SMAS anadesma lifting. It not only solves problems of facial sagging and relaxation, but also activates subcutaneous collagen reorganization and regeneration. Facial problems such as coarse pore, wrinkles, elasticity degeneration will be improved at large.
GBS HIFU utherapy machine supply 8 different depths of transducers, each cartridge has different treatment functions.
1.5mm cartridge (default): 1. Acne 2. Pore Reduction 3. Skin Tone Improvement 4. Winkle Reduction 5. Skin Rejuvenation
3.0mm cartridge (default): 1. Eyebrow Lifting 2. Nasonabial Fold Reduction
4.5mm cartridge (default): Skin Lifting
8.0mm cartridge (optional purchase): Skin lifting and body slimming: chest, back, arm and leg
10.0mm cartridge (optional purchase): Skin lifting and body slimming: back, abdomen, buttock
13.0mm cartridge (optional purchase): Skin lifting and body slimming: back, abdomen, buttock
16.0mm cartridge (optional purchase): Skin lifting and body slimming: back, abdomen, buttock
What is Ultharepy?
Ultharepy is a non-surgical ultrasound treatment for counteracting the effects of time and gravity on your skin. The beauty of this 30-60 minute face and neck treatment is that it uses the body’s own regenerative response to gently and gradually restore memory to the skin and underlying tissue support.
How does the Ultharepy procedure work?
As with other ultrasound procedures, a smooth applicator placed upon your skin projects an image onto a screen that allows your practitioner to plan where the energy will be directed. This same applicator is then used to deliver low levels of focused heat to just the right depth below the skin to achieve a positive effect, all the while leaving the surface of your skin undisturbed. Your skin’s response to the energy is to stimulate the growth of new collagen. A gradual tightening and firming occurs, resulting in a natural lift of the skin over time.
How is this procedure different than other cosmetic procedures?
Ultharepy is the only non-surgical skin rejuvenation procedure that specifically target the deep foundational layer of tissue that doctors address in surgery. The ability to treat not just the skin but its underlying support very precisely, from the inside out, helps to ensure both safe and satisfying results, with no downtime.
What does it feel like?
There can be some discomfort while the energy is being delivered, but it is temporary, and a signal that the collagen-building process has been initiated. Comfort thresholds vary from patient to patient, and practitioners will discuss options for making the experience as pleasant as possible. Patients typically leave comfortable and excited about the benefits to come.
What can I expect afterward?
You are able to return to your normal activities right away, and there are no special measures you need to take. Your skin may appear a bit flushed immediately after the treatment, but any redness should disappear within a few hours. It is not uncommon to experience slight swelling for a few days following the procedure or tingling/tenderness to the touch for a few weeks following the procedure, but these are mild and temporary in nature. There is the possibility of other less common post-procedural effects, such as temporary small areas of bruising or numbness, which your physician will review with you.
Is Ultharepy safe?
Ultrasound energy has a proven track record, with over 50 years of use in the field of medicine, and clinical trials have demonstrated the safety of this latest application.
What kind of results can I expect?
With just one treatment, the regenerative process is initiated, but the full effect will build gradually over the course of two to three months. Some patients may benefit from more than one treatment. Visible effects include a lifting and toning of sagging skin. Patients reported firmer, better-fitting skin in other areas of the face and neck as well. There is also an invisible result from the procedure with the creation of new collagen, which can help to slow down the rate of skin aging.
Who is a good candidate for Ultharepy?
A good candidate for Ultharepy is someone with skin that has “relaxed” to the point of looking and often feeling, less firm. A lowered brow line or sagging skin on the eyelids, for instance, is often the first sign of “maturing” skin. While it does not duplicate the results of surgery, Ultharepy has proven to be an inviting alternative for those who are not ready for surgery.
If you are looking for more details, kindly visit Multiline HIFU Machine.